Two packages are dropped from the same height. One product remains undamaged. The other experiences a shock high enough to damage a sensitive internal component.
The drop height was the same. What happened between impact and product response wasn’t.
Drops and impacts are part of almost every distribution environment, during manual handling, loading and unloading, or when a load tips or strikes handling equipment. We tend to group all these events under one word: impact. But they don’t affect a product in the same way.
Understanding these differences is important when defining a test program that represents the types of impact a product may actually experience during distribution.
In this article, we look at what happens during an impact, why drop height alone doesn’t define shock severity, and how different impact conditions and packaging characteristics influence the response of the product
What actually happens during a drop?
When a package hits the ground, the energy generated during the fall has to go somewhere. Part of it can be absorbed through deformation of the packaging, while the rest is transmitted to the product.
How quickly the product decelerates has a major influence on the acceleration it experiences. That’s why two identical products dropped from the same height can experience very different shock levels depending on the packaging system around them.
Drop height alone does not tell us how severe the shock will be for the product inside.
Shock also has a duration and a characteristic waveform. Two shocks with similar peak acceleration can still differ in how they affect the product, particularly when it contains sensitive components such as electronics, displays, connectors, or mounting systems.
So while drop height is an important test parameter, it is only one part of what defines the impact conditions. Other factors, such as the size and weight of the package or product, also need to be considered.
The same height, a different result
Orientation changes how the impact enters the system, even when the drop height remains exactly the same.
- A flat drop distributes the initial impact over a relatively large area.
- An edge drop concentrates it over a smaller area and can introduce rotational movement.
- A corner drop creates an even more localized impact and can involve several parts of the packaging structure at once.
A packaging system that performs well during a flat drop may therefore reveal completely different weaknesses during an edge or corner impact.
This is why drop orientation is an important test parameter. ASTM D5276 provides a controlled method for free-fall testing, while the applicable test procedure defines conditions such as drop height, orientation and sequence.
Height matters, but so does how the package reaches the impact surface.
Not every impact comes from a free fall
Free-fall drops are particularly relevant when a package can become completely unsupported during handling. But as products become larger, heavier, or more difficult to handle, the type of impact they are likely to experience can change.
A small parcel may fall freely, while a large appliance, industrial product, or server rack may be more likely to tip around an edge, producing a rotational drop. In this case, part of the package remains in contact with the surface while it rotates, making factors such as geometry and center of gravity particularly relevant.
Other types of impact don’t involve the package falling at all. A concentrated impact occurs when an external object strikes a relatively small area of the package, creating localized forces that can cause puncture or deformation. This type of impact is addressed by test methods such as ASTM D6344.
Free-fall drops, rotational drops, and concentrated impacts introduce energy into the product-packaging system in different ways and can expose different types of damage. The appropriate test method therefore depends on the impact conditions relevant to the product and its distribution environment.
How packaging changes the shock the product actually feels
Identifying the type of impact is only part of the picture. What ultimately matters is how the resulting shock is transmitted through the packaging to the product.
Packaging and cushioning materials can deform during impact, helping absorb energy and reduce the acceleration transmitted to the product. But their performance depends on factors such as material properties, thickness, product weight, and impact conditions. More cushioning doesn’t automatically mean better protection.
Dynamic cushion testing and cushion curves can help engineers understand how cushioning materials perform under different conditions and select the appropriate protection for a specific product (see how Virginia Tech is using controlled impact testing to advance cushioning research →).
This also explains why visible packaging damage doesn’t necessarily mean the product is damaged. Deformation may be part of how the packaging absorbs impact energy. Conversely, packaging can appear relatively undamaged while a sensitive component inside has experienced a damaging shock.
This is why the response of the complete product-packaging system needs to be considered, not just the condition of the outer packaging.
Choosing what to reproduce in the lab
Standards such as ISTA, ASTM and ISO provide controlled and repeatable procedures for reproducing different impacts.
Drop testing procedures vary depending on the applicable standard or protocol, including those developed by organizations such as ISTA, ASTM, ISO, FedEx, and the U.S. Department of Transportation. Test conditions commonly define parameters such as:
- Drop height
- Specimen orientation
- Number and sequence of drops
Our drop test systems are designed to meet demanding industry requirements and are factory tested to verify drop accuracy and flatness, helping ensure controlled and repeatable impact conditions.
But choosing what to test starts with understanding the distribution environment. A parcel moving through an e-commerce network doesn’t experience the same handling conditions as a palletized appliance or a large industrial product. Their weight, dimensions, handling methods, and potential types of damage are different.
Field data can add another layer of information by helping identify the impacts that actually occur during distribution. Combined with standardized testing and knowledge of the product’s critical components, this can help determine which hazards deserve closer investigation in the laboratory.
The objective isn’t to reproduce every impact a shipment could theoretically experience. It is to understand which events are relevant, how the packaging modifies them and how the product responds.
Understanding the hazard comes first
A meaningful shock and drop test starts before the drop — by understanding the event you are trying to reproduce.
Drop height matters. So do orientation, shock duration, waveform, packaging behavior, product characteristics, and the type of handling event the product may actually encounter.
Understanding these variables helps engineers determine whether free-fall, rotational, or concentrated impacts are relevant and select test conditions that better represent the distribution environment.
Because the objective isn’t simply to make a package survive a drop. It’s to understand how the product-packaging system will respond to the impacts it may actually experience during distribution.
Case study: From theory to practice: testing different impact conditions
One operation shipping more than 200,000 fully integrated racks a year found that generic drop testing didn’t reflect how their loads were actually handled. They worked with our engineering team to build a custom drop tester capable of reproducing flat, edge, corner and rotational impacts under ASTM D4169, ASTM D7386 and ISTA procedures — matched to their real distribution conditions.
Are you reproducing the right impacts?
Selecting the right test conditions starts with understanding how your products are handled, which impacts are relevant, and what needs to be measured to evaluate the shock they generate.
At Safe Load Testing Technologies, we help engineering and testing teams reproduce these impacts under controlled, repeatable conditions — and figure out which ones actually matter for your product before you build a test program around the wrong one.
Our team can also help you assess your testing requirements, select the appropriate equipment, and define the capabilities your lab needs for your products and distribution environment.
Contact our team to discuss your shock and drop testing requirements starting with the impact you’re least confident you’re testing for.








