Compression testing is a critical process in the packaging and logistics industries to ensure product integrity during transportation and storage. This exhaustive glossary provides clear and concise definitions of the most relevant technical terms in the field of compression testing, serving as a valuable resource for both beginners and experienced professionals.

Basic concepts in compression testing

  • Compression: Force acting on an object, tending to reduce its volume or deform it.
  • Compression strength: The ability of a material or structure to withstand loads that tend to reduce size.
  • Deformation: Change in shape or size of an object due to an applied external force.
  • Elasticity: Property of a material allowing it to return to its original shape after being deformed.
  • Plasticity: Ability of a material to undergo permanent deformation without breaking.

Equipment and components

  • Compression Tester: Machine specifically designed to perform compression tests on packaging and containers.
  • Compression platen: Flat surface that applies the compressive force to the sample during testing.
  • Load cell: Sensor that measures the force applied during the compression test.
  • Extensometer: This device is used to measure the deformation of the sample during testing.
  • Servo motor: A high-precision motor is used to control the movement of the compression platen.

Test Parameters in compression testing

  • Maximum force: The highest load applied during the compression test, typically measured in newtons (N) or kilonewtons (kN).
  • Compression speed: Rate at which the compressive force is applied, usually measured in millimeters per minute (mm/min).
  • Displacement: Distance the compression platen moves during the test.
  • Preload: Small initial force applied to the sample before beginning the main test.
  • Yield point: Point at which a material begins to deform plastically.

Test Types in compression testing

  • Static compression test: Test in which a constant or gradually increasing load is applied to the sample.
  • Creep test: Evaluation of a material’s deformation under constant load over time.
  • Cyclic test: Test involving repeated application of compressive loads to evaluate material fatigue.
  • Stacking test: Evaluation of a package’s ability to withstand loads when stacked.

Data analysis in compression testing

  • Force-displacement curve: Graph showing the relationship between applied force and resulting displacement during the test.
  • Elastic modulus: Measure of a material’s stiffness, calculated from the slope of the stress-strain curve in its elastic region.
  • Compressive stress: Compressive force per unit area, typically expressed in pascals (Pa) or megapascals (MPa).
  • Strain: Change in length of the sample divided by its original length, expressed as a percentage.
  • Energy absorption: Amount of energy a material can absorb before failure, represented by the area under the force-displacement curve.

Materials and Structures

  • Corrugated board: Material commonly used in packaging, composed of a fluted layer between two flat layers.
  • Honeycomb: Honeycomb structure used in packaging to provide strength and lightness.
  • Expanded Polystyrene (EPS): Lightweight material used to cushion and protect products during transport.
  • Pallet: Platform used for transporting and storing goods, often subjected to compression testing.
  • Buckling: Lateral deformation occurring in columns or thin structures under compression.
  • Poisson effect: Tendency of a material to expand laterally when compressed longitudinally.
  • Strain hardening: Phenomenon where a material becomes stronger as it’s plastically deformed.
  • Hysteresis: Difference between loading and unloading curves in a compression cycle.

This glossary provides a solid foundation for understanding the terminology used in compression testing, particularly in the context of packaging and logistics testing equipment. Mastering these concepts is essential for correctly interpreting test results and optimizing packaging designs. As the industry advances, it’s crucial to stay updated with new terms and technologies emerging in this ever-evolving field.

At Safe Load Testing, we specialize in designing and manufacturing top-tier compression testers tailored to meet the highest industry standards. Whether you’re looking to enhance your packaging’s resilience or ensure compliance with international regulations, our expert team is here to help. Contact us today to discover how our solutions can benefit your business.

Our innPress

Designed for testing compressive strength of packaging and creep performance of shipping containers, pallets and unit loads, according with the ASTM and ISTA international standards.

Feature Details
Purpose Evaluates package strength, resistance, deformation, and stacking capability.
Simulation Simulates vertical and lateral forces during handling and transportation.
Models & Specifications
  • CM10-500: 10 kN, 500 x 500 mm platform, max stroke 500 mm.
  • CM25-1300: 25 kN, 1300 x 1300 mm platform, max stroke 1300 mm.
  • CM50-1500: 50 kN, 1500 x 1500 mm platform, max stroke 1500 mm.
  • CM100-2100: 100 kN, 2100 x 2100 mm platform, max stroke 2100 mm.
  • CM200-2100: 200 kN, 2100 x 2100 mm platform, max stroke 2100 mm.
Compression Speed 5 – 200 mm/min
Load Accuracy < 0.5%
Position Accuracy < 0.1 mm
Controller Intuitive interface with real-time testing data
Testing Modes Constant rate, Apply and hold, Apply and release
Compliance with Standards EN 15552, ASTM D4169, ISO 8611, ISO 2872, ASTM D642, ISTA, TAPPI T804, and others.
Applications Compatible with multiple industries and standards-specific testing requirements.
Accessories ISO 8611 accessories for pallets and table for lower compression ranges.

HOW CAN WE HELP YOU?

We put our knowledge in packaging engineering, transport simulation, tests and regulations at your disposal so that you can apply it to your project

Request help from our experts

Our team will help you solve any doubt
Learn more

Do you want to start a project with us?

We help you with the necessary first steps
Learn more

Want to contact us?

We would like to meet you and learn more about your project
Learn more